What if the temperature of the temperature and pressure reducing device cannot drop?

a、 During the debugging process, if the temperature cannot be reduced, the main consideration is that the water quality is not clean. Rust and particulate matter will block the water supply control valve and nozzle, and the cooling water cannot be sp…

What if the pressure of the temperature and pressure reducing device cannot be reduced?

a、 The main consideration is to use a steam flow rate that is too small and a pressure reducing valve that is too large.b、 The main consideration is whether there are impurities inside the pressure reducing valve that cause jamming, making it unable…

What should I do if the actuator of the temperature and pressure reducing device stops working?

a、 The thyristor corresponding to the secondary pressure regulator is damaged, replace the secondary pressure regulator.b、 If the actuator is faulty, check if it is damaged. For actuators controlled by forward and reverse signals, the following meth…

Temperature and pressure reducing device - installation

1. Professional installation companies or teams shall strictly follow the installation drawings and technical data for installation.2. Install the temperature and pressure reducing device according to the overall diagram number of the system, and inst…

Temperature and pressure reducing device - operation

1. Understand the working principle and function of our companys temperature and pressure reducing device system, as well as the process effect to be achieved.2. Understand the main structure and parameter operating conditions of the temperature and p…

Temperature and pressure reducing device - debugging

1. Prepare well before operation.(1) Check the connections and installation between various components, strictly follow the installation diagram for installation, and do not miss or install in the opposite direction.(2) Check the installation of each …