Effective thrust of valve rod - Dongchen Intelligent Technology Co., Ltd

CLASSIFICATION





Effective thrust of valve rod Introduction

The 1-X400 series linear stroke piston pneumatic actuator uses cold drawn hydraulic pipes as the cylinder block, which undergo honing and extrusion processes to greatly reduce the wear of dynamic sealing components and improve the durability of the actuator. Compared with thin film linear actuators of the same specifications, it has greater thrust. have

The characteristics of simple structure, light weight, and small volume make it a high-performance pneumatic linear actuator. The 1-X400 series linear stroke piston pneumatic actuator comes in two forms: double acting and single acting. When combined with linear stroke valves, it can be used for adjustment or switch control. Equipped with accessories such as pneumatic control valve, quick exhaust valve, pneumatic relay, etc., it can achieve quick cut-off, with fast cut-off time divided into multiple levels such as 1S, 2S, 3S, 4S, etc.

0571-85222210

Product Sample Download

Details

◆Execution standards

Form	Pneumatic piston type straight stroke
Specifications	P200(S)、P250(S)、P300(S)、P400(S)、P500(S)
Action	Positive effect: As the air pressure increases, the output axis moves downward
Action	Reaction: An increase in air pressure causes the output axis to move upward
Action form	Single acting (indicated by suffix S), double acting
Rated travel	17、25、34、45、60、76、100、120、150、200mm
Output thrust	See the table below
Air channel pressure	0.3、0.36、0.45MPa
Spring range	0.10~0.20MPa、0.12~0.24MPa、0.15~0,30MPa
Handwheel	Specifications P200 (S), P250 (S), P300 (S) - Top mounted handwheel
Handwheel	Specifications P300 (S), P400 (S), P500 (S) - Side mounted handwheel

◆Actuator parameters

Form			Pneumatic piston linear actuator
Specification and model			1-X400 P200(S)		1-X400 P250(S)		1-X400 P300(S)		1-X400P400(S)		1-X400P500(S)
Membrane chamber diameter（mm）			200		250		300		400		500
Effective area（cm²）			230		420		600		920		2480
Air supply pressure (MPa）			0.30(0.1~0.2)0.36(0.12~0.24)0.45(0.15~0.30)MPa
Rated travel（mm）			17 25	25 34		34 45		60 76 100		120 150 200
Output thrust（N）	Single action	0.30（0.1~0.2）MPa	2770	4032		6240		11090		17320
		0.36（0.12~0.24）Mpa	3320	4824		7480		13300		20780
		0.45（0.15~0.30）Mpa	4160	6036		9350		16620		25970
	Double action	0.30MPa	8320	12072		4870C		33260		51960
		0.36MPa	9970	14484		22450		39900		62340
		0.45MPa	12470	18096		28050		49880		77930
Lag			≤ 1% FS (with locator) - compliant with GB/T4213 standard
Linear			≤± 2% FS (with locator) complies with GBT4213 standard
Air chamber sealing			Pressure reduction value<5.0KPa/5min - meets GB/T4213 standard
Service life			≥ 100000 meets the GB/T4213 standard
Ambient temperature			Positioner, filter pressure reducing valve, speed increasing relay, solenoid valve, pneumatic valve, locking valve (holding valve)
Annex			Positioner, filter pressure reducing valve, speed increasing relay, solenoid valve, pneumatic valve, locking valve (holding valve)
			Speed controller, limit switch, position transmitter, manual mechanism, maximum adjustable mechanical limit, minimum adjustable mechanical limit
Optional			Special interface, specified coating, connection positioning hole diameter, push rod extension length, connection thread